Design of a Process for Planning and Controlling Production by Using Mathematical Tools
DOI:
https://doi.org/10.46661/revmetodoscuanteconempresa.2208Keywords:
Sistemas de producción, planificación de la producción, herramientas matemáticas, horizontes de planificación, production systems, planning and control of production, mathematical tools, horizons of planningAbstract
Manufacturing companies require radical changes to achieve the required quantity and quality of their products and respond to market needs quickly. This issue is essential for a correct selection of the planning and control of production. The practical application of a specific tool depends on the classification of their productive system. Currently, to authors knowledge, there is no procedure that allows the selection of a suitable planning tool to be applied in a certain manufacturing company. The proposed procedure allows the companies to identify and to select the mathematical tool that it is best adjusted to its necessities, propitiating a bigger focus to the client, an increase of the level of management of the production, an increase of the level of management of the company, and a more effcient utilization of the resources.
Downloads
References
Aragonés, B.P. (2003) “Técnicas de ayuda a la toma de decisiones en proyectos”, Documento de trabajo, Departamento de Proyectos, Universidad Politécnica de Valencia, 30 p.
Crespo, T.F.; García, J.M.V. (1996) “Sistemas de planificación y control de la fabricación: Análisis Comparativo”, Investigaciones Europeas de Dirección y Economía de la Empresa, 2: 101–124.
Dante, O.; Corominas, A.; Lusa, A.; Martínez, C. (2008) “Modelo de planificación agregada de la producción, la plantilla, el tiempo de trabajo y la tesorería”, II International Conference on Industrial Engineering and Industrial Management, XII Congreso de Ingeniería de Organización, 2.
Fuente, D. (2006) “Planificación de la Producción”, Documento de Trabajo: Introducción a la Planificación de la Producción. Departamento de Ingenieros Industriales, 132 p.
Garza, R.R.; González, C.S. (2004) “Modelo matemático para la planificación de la producción en la cadena de suministro”, Revista de Ingeniería Industrial, 25: 26–29.
Gutiérrez, M., Rivera, F.A.; Durán, A.; Sastrón, F. (2012) “Paralelismo entre la teoría transformación-flujo-valor (TFV) y los tipos de fabricación”, D-O, 4: 31–38.
Hernández, S.G.; Téllez, S.B. (2000) “Planeación y control de la producción”, Documento de clase: Sistemas para determinar los volúmenes óptimos de producción e inventarios mediante el uso de modelos, métodos y reglas en cualquier sistema de producción.
Jacobs, F.R.; Weston, F.C. (2007) “Enterprise resource planning (ERP) –A brief history”, Journal of Operations Management, 25: 357–363.
Marín, F.; Delgado, J. (2000) “Las técnicas justo a tiempo y su repercusión en los sistemas de producción”, Economía Industrial, 1: 35–41.
Mora, A.B.; Tobar, J.L.; Soto, J.M. (2012) “Comparación y análisis de algunos sistemas de control de la producción tipo pull, mediante simulación”, Scientia et Technica, 51: 100–106.
Mula, J.B.; Poler R.E.; Cruz, F.E. (2002) “Modelos y métodos para la planificación de la producción de la cadena de suministro bajo incertidumbre: una introducción al estado del arte”, II Conferencia de Ingeniería de Organización, 2: 447–456.
Mula, J.B.; Poler, R.E.; García, J.P. (2004) “Aplicaciones de la teoría de los conjuntos difusos en la planificación de la producción: un estudio de la literatura”, VIII Congreso de Ingeniería de Organización, 101–110.
Mula, J.B.; Poler, R.E.; García, J.P. (2005) “Evaluación de sistemas para la planificación y control de la producción”, Información Tecnológica, 17: 19–34.
Ortiz-Araya, V.; Albornozo, V.M.; Bravo, D. (2012) “Determinación de un plan maestro de producción a nivel táctico para una cadena de suministro industrial utilizando una metodología de planificación jerarquizada”, Revista de Ingeniería Industrial, 12.
Rodríguez, P.L.G.; Framiñán, J.M.; Ruiz-Usano, R. (2002) “Control de la producción mediante un sistema con inventario en proceso constante: CONWIP. Estado de la cuestión”, II Conferencia de Ingeniería de Organización, 2: 457–465.
Tamayo, A.G. (2012) “Diagnóstico y clasificación de sistemas de producción. Aplicación en Laboratorios NOVATEC”, Trabajo de Diploma, Ingeniería Industrial, Cujae.
Turgay, S.; Kubat, C.; Taskin, H. (2007) “Modelling and simulation of MRP II activities in multi agent systems”, Production Planning & Control, 18: 25–34.
Urquiola, G.I. (2014) “Diseño de un procedimiento para la planificación y control de la producción. Aplicación en la fábrica de helados Nestlé”, Tranajo de Diploma, Ingeniería Industrial, Cujae.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Revista de Métodos Cuantitativos para la Economía y la Empresa
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Submission of manuscripts implies that the work described has not been published before (except in the form of an abstract or as part of thesis), that it is not under consideration for publication elsewhere and that, in case of acceptance, the authors agree to automatic transfer of the copyright to the Journal for its publication and dissemination. Authors retain the authors' right to use and share the article according to a personal or instutional use or scholarly sharing purposes; in addition, they retain patent, trademark and other intellectual property rights (including research data).
All the articles are published in the Journal under the Creative Commons license CC-BY-SA (Attribution-ShareAlike). It is allowed a commercial use of the work (always including the author attribution) and other derivative works, which must be released under the same license as the original work.
Up to Volume 21, this Journal has been licensing the articles under the Creative Commons license CC-BY-SA 3.0 ES. Starting from Volume 22, the Creative Commons license CC-BY-SA 4.0 is used.